Precautions for daily use of wood plastic flooring

When using wood plastic flooring, consumers should pay attention to the coating on the epoxy floor and the temperature rise on the floor. Before the mechanical equipment, the cement concrete pavement should be slowly heated up, increasing by 5 degrees per day to ensure a standard of around 18 degrees. During the first three days after the success of the mechanical equipment, it is necessary to patiently maintain this temperature, and only after three days can the temperature be increased as needed. The temperature can be increased by 5 degrees per day.

1. Pay attention to the temperature rise and gradually increase it

When using geothermal heating, please pay attention to gradually increasing the temperature. During the first three days of heating operation, the temperature should slowly increase during a single use. The heating should not be too fast. If it is too fast, the floor will expand and crack, distorting the scenery. When the geothermal heating system is restarted for management after a long period of time, it is necessary to follow the heating operation procedure for heating, such as reuse.

2. The temperature of the soil layer should not be too high

It must be noted that when using geothermal heating, the soil layer temperature should not exceed 28 and the water pipe temperature should not exceed 45. If it exceeds this temperature, it will damage the lifespan and service life of the floor.

3. Pay attention to lowering the temperature

With the change of seasons, the weather is getting warmer and the heating system in the room is no longer managing heating. It is important to pay attention to the entire process of managing a closed heating system. The entire process of ground cooling must be carried out in stages, and sudden drops are not allowed. If the cooling rate is too fast, it can also damage the lifespan of the floor.